125
Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview
M
ani
pul
at
in
g C
lip
s w
ith
Thu
mbn
ail
s
4
With the pointer located in the lower part,
move the pointer to the desired text memo
number using the cursor right and left buttons
(
"!
). Then, press the PLAY button.
z
Playback will start from the time code position of the
text memo where the pointer is located. If the STOP
button is pressed during playback or the playback
has finished at the end of the clip, then the thumbnail
screen appears again with the pointer replaced with
the text memo where the playback started.
z
While holding down the SHIFT button, use the cursor
buttons up/down (
#
/
$
) to move the pointer to the
first or last text memos.
z
Press the THUMBNAIL MENU button to select EXIT
or press the EXIT button to return the pointer to the
upper part of the thumbnail screen.
Note
z
Pressing the REC button in the text memo screen will not
start recording.
z
For AVC-Intra format clips that cannot be played back, text
memo thumbnails cannot be displayed, and may be shown
as a
icon.
1
Select the desired text memo by carrying out
steps
1
-
3
for [Playing back a clip at the
position where a text memo is recorded] (page
124).
2
Move the pointer to the desired text memo,
and then press the SET button.
3
Press the THUMBNAIL MENU button to select
OPERATION
>
DELETE from the thumbnail
menu.
YES and NO appear to confirm deletion. Use the cursor
buttons and the SET button to select YES.
The text memo is deleted.
1
Select a desired text memo in a clip by
carrying out steps
1
-
3
for [Playing back a clip
at the position where a text memo is recorded]
(page 124).
2
Move the pointer to the desired text memo,
and then press the SET button.
You can select more than one text memo.
3
Press the THUMBNAIL MENU button to select
OPERATION
>
COPY.
4
User the cursor buttons and SET buttons to
select the destination slot. Then, select YES
z
Copying starts.
z
The portion between the selected text memo and the
next one is copied.
If no text memo is found after the selected one, then
all part after the selected text memo is copied.
z
If multiple text memos are selected, the selected
sections are copied.
z
When the clip is being copied, the camera-recorder
indicates the progress of the copy process and
cancellation status. To discontinue the copy process,
press the SET button. Then, a YES/NO confirmation
screen is displayed. Use the cursor buttons and SET
button to select YES.
Note
In clip division and copying using the text memo function, the
area copied may be automatically modified depending on the
recording format of the clip.
Deleting a text memo
Using a text memo to break a clip and copy the
necessary portion
AJ-HPX3100G(VQT3A79)_E.book 125 ページ ２０１０年９月１７日 金曜日 午後９時２１分
