Panasonic AG-HPD24PJ Скачать руководство пользователя

Страница: 151 / 161

For Long and Trouble-Free Operation: Warning and Error Messages

Storage

CANNOT ACCESS

CARD!

An error occurred during P2 card access.

Check P2 card.

CANNOT ACCESS

TARGET!

An error occurred while trying to access the

connection target.

Check storage device status and connections.

CANNOT COPY!

FORMAT STORAGE TO

FAT

Clips cannot be copied to a storage device

without partitions.

Format using a FAT format or export data from a P2

card to create a partition.

CANNOT FORMAT!

A storage device cannot be formatted.

Connect a different storage device.

CANNOT RECOGNIZE

STORAGE

The storage device cannot be properly

recognized.

Reboot the storage device or connect a different

device.

CANNOT SELECT!

MAX.6 PARTITIONS

It is not possible to mount a storage device

with more than 6 partitions.

Cancel some of the selected partitions.

CARD IS EMPTY!

CANNOT COPY!

The P2 selected for copying is empty.

Copying is not performed since the card is empty.

FORMAT P2 CARD!

Importing is not possible to a P2 card

containing clips.

Format the P2 card.

LACK OF CAPACITY!

Not enough space left on the storage device.

Use a new storage device with enough free space or a

formatted storage device.

STORAGE

DISCONNECTED!

The unit has been disconnected from the

storage device.

Reconnect the USB cable to the HOST connector. If the

device still does not operate normally, turn it off and

then back on again.

MISMATCH

COMPONENT!

Copying is not possible since the model

numbers of the two cards differ.

Use a P2 card with the same model number or import

video in clip units.

P2 CARD IS

UNFORMATTED!

The P2 card is not formatted.

Use a formatted P2 card.

TOO MANY

PARTITIONS!

There are too many partitions.

Storage device can handle up to 23 partitions. Use a

new storage device or formatted storage device.

UNKNOWN DEVICE

CONNECTED!

The connected DVD drive or other device is

not supported.

Connect a compatible storage device, turn off the unit

and turn it back on again.

VERIFICATION FAILED! Verification after copying failed.

Copy the data again.

Soft

keyboard

CANNOT CHANGE!

An attempt was made to change PERSON

when no text memo had been entered.

First enter a text memo.

CANNOT SET!

INVALID VALUE!

The entered value is invalid.

Enter a valid value.

Item

Message

Description

Measure

Содержание AG-HPD24PJ


































































































































































Результаты поиска

Содержание AG-HPD24PJ

Отзывы:

Похожие инструкции для AG-HPD24PJ

Бренды по названию

Популярные бренды

Panasonic AG-HPD24PJ, Руководство по эксплуатации

Результаты поиска

Содержание AG-HPD24PJ

Отзывы:

Похожие инструкции для AG-HPD24PJ

Бренды по названию

Популярные бренды