Panametrics CGA 351, Руководство пользователя, Страница: 61 / 119

CGA 351 User’s Manual 55
Chapter 4.
4.1.10 Adjusting the Display Contrast
To adjust the contrast of the LCD display, enter the
User Program, as described on page 27, and proceed as follows:
Note: The [Lock All] and [Versions] options are also available in the above list box.
Note: The [Backlight] and [Comm] options are also available in the above list box.
The meter now automatically returns to the “User” prompt. This completes the adjusting of the display contrast. Either
press [ESC] until you exit the
User Program or proceed to the appropriate section of this chapter to continue
programming the analyzer.
4.1.11 Setting the Display Backlight
To set the LCD display backlight, enter the User Program, as described on page 27, and proceed as follows:
Table 90:
Cfg Cal Opt Disp Use the [

] and [

] keys to
select [Opt] and press
[ENTER] .
POWER ESC ENTER
Table 91:
Cfg Cal Opt Disp A list of the available options
is shown. Use the [

] and [

]
keys to select [User] and
press [ENTER] .
User
Setup
Lock Menus
POWER ESC ENTER
Table 92:
Cfg Cal Opt Disp A list of the available options
is shown. Use the [

] and [

]
keys to select [Contrast] and
press [ENTER] .
Analog Output
Contrast
Backlight
POWER ESC ENTER
Table 93:
User Adjust-Contrast Use the [

] and [

] keys to
increment the value to a
number between 35 (min.
contrast) and 50 (max.
contrast). When done, press
[ENTER] .
Adjust Contrast
p
0 q
POWER ESC ENTER