PairGain PG-PLUS PLL-734 Скачать руководство пользователя страница 30

Страница: 30 / 46

Conventions Used in This DocumentAdministration

950-734-100-01, Revision 01

December 18, 1998

PLL-734 List 1

System Options Screen

System Options screen allows the provisioning of options such as ringing frequency, LCFO blocking, SDT, and
a System ID.

Table 6

shows the configured system option and the factory default value.

Select CONFIG from the menu and press

to display the submenu.

Scroll to the System Options line and press

to view the screen.

Highlight the desired field and press

to toggle to the desired value, or use a directional key to

move to the next option.

Press

to move to the

Accept System Option Changes

button, and press

to accept the

changes.

Press

to move up a menu level, or

to return to the PAU/PMU Main menu.

Table 6.

System Options Configuration Fields

Options

Description

Default

POTS Ringing

Frequency

The ringing frequency sent from the RT to the subscriber. Possible values include 20 Hz,

25 Hz, 30 Hz, and 50 Hz.

20 Hz

LCFO

Blocking

When turned on, this feature blocks Loop Current Feed Open (LCFO) signalling from being

sent to the RT. When activated, LCFO blocking maintains battery feed at the RT during an

LCFO event.

Off

SDT

Compatibility

Specifies whether the PG-Plus initiates and operates with MLT or 4TEL loop test systems.

Select the test type according to the loop testing system in use. Possible values include Off,

MLT, and 4TEL. Craft initiated SDTs work in any selection.

Off

PG-Plus

System ID

Configurable identification string for system. This string can be up to 24 characters.

Because the System ID is visible at every COLU screen, it is easy to know which COLU

screens are displayed. There are no special rules for changing the System ID. Any printable

character, including space, is valid.

PG-Plus

System

(17(5

63$&(%$5

7$%

(17(5

(6&

&75/

Содержание PG-PLUS PLL-734















































Результаты поиска

Содержание PG-PLUS PLL-734

Отзывы:

PairGain PG-PLUS PLL-734, Руководство пользователя, Страница: 30 / 46

Результаты поиска

Содержание PG-PLUS PLL-734

Отзывы: