PairGain PG-PLUS PLL-734 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 46

PairGain PG-PLUS PLL-734 Скачать руководство пользователя страница 25

950-734-100-01, Revision 01

Conventions Used in This DocumentAdministration

PLL-734 List 1

December 18, 1998

19

HDSL 7-day History Screen

This screen shows seven days of performance history plus the current day's accumulated performance
information. The information displayed includes ES counts, UAS counts, and the validity of the values.

1

Select Performance from the menu bar and press

to display the submenu.

2

Scroll to the HDSL 7 Day History option and press

to view the screen:

The COLU derives the ES and UAS performance parameters for both the COLU and the selected RT with
the valid field values of Unavailable, Partial, Complete, and Adjusted.

3

At the

Clear HDSL 7 day History

prompt, type

to clear the 7-day history information. The current

day performance information shows real-time updates. At midnight of every day, the current day performance
information is moved into the previous day slot and the current day performance information is cleared.

4

Press

to move up a menu level, or

+

to return to the PAU/PMU Main menu.

Clearing the 7-day performance history does not clear the current day performance
information. The current day performance information may only be cleared through the HDSL
24-hour performance history screen. The date and time that the 7-day performance history was
last cleared appears at the bottom of the screen.

(17(5

(17(5

<

(6&

&75/

5

«
...
23
24
25
26
27
...
»

Содержание PG-PLUS PLL-734















































Отзывы:

Нет отзывов