PairGain PG-PLUS PLL-734, Руководство пользователя, Страница: 16 / 46

Conventions Used in This DocumentAdministration 950-734-100-01, Revision 01
10 December 18, 1998 PLL-734 List 1
C
ONVENTIONS
U
SED IN
T
HIS
D
OCUMENT
Some screenshots in this document come from a prototype setup and may appear slightly different from what you
see on your Craft interface screen. The basic information and contents should be similar. This document uses the
following conventions for menus and shortcuts:
L
OGGING
O
N
1 Press several times to activate the Autobaud feature. Supported baud rates are 1200, 2400, 4800,
9600, and 38400. The Logon Password screen displays.
2 Type the default password and press to view the PAU or PMU Main Menu bar.
L
OGGING
O
FF
If you must leave your VT-100 terminal unattended for any length of time, it is good practice to log out until you
are ready to resume work. This prevents unauthorized persons from inadvertently changing any of your operating
parameters. Log out by choosing Quit from the menu bar or by disconnecting the cable connecting the console to
the PAU/PMU.
Example Describes
menu
name of menu item
submenu
name of submenu item
prompts
the place where you answer yes or no or type some other response
error
the name of what’s wrong
error text
an explanation of what’s wrong
xxxx a variable, such as POTS unit 1 in a 6 POTS unit
password#1 is the factory-default password. If you establish a different password, you must
type the new password at a subsequent log on.
Passwords are not case sensitive. The password must use at least 6 and no more than 10
characters, and the new password MUST contain at least 1 alpha, 1 numeric, and 1 special
character.
If the system does not respond, verify that the Hardware Flow Control of the VT-100 terminal is
set to On.
63$&(%$5
(17(5