PairGain PG-PLUS PLL-734 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 46

PairGain PG-PLUS PLL-734 Скачать руководство пользователя страница 24

Conventions Used in This DocumentAdministration

950-734-100-01, Revision 01

18

December 18, 1998

PLL-734 List 1

HDSL 24-Hour History Screen

The following screen shows twenty-four hours backwards from the current time of HDSL performance history for
the COLU and the selected RT that includes ES counts, UAS counts, and the validity of the values.

1

Select Performance from the menu bar and press

to display the submenu.

2

Scroll to the HDSL 24 Hr. History option and press

to view the screen.

The current 15-minute interval information shows the real-time updates. The COLU derives the COLU and
RT ES and UAS performance parameters, which have the valid field values of:

•

Unavailable: The system has not run long enough to fill this register.

•

Partial: Data is being collected for this register.

•

Complete: Data is saved in the history register for the complete interval.

•

Adjusted: The time or date has been changed on the system during the interval.

3

Highlight a paging button and press

to scroll through all ninety-six 15-minute intervals.

4

Highlight the

Clear History

button and press

to clear the history.

5

Press

to move up a menu level, or

+

to return to the PAU/PMU Main menu.

If there are active alarms associated with the current 15-minute and 24-hour performance
history information, those alarms become inactive when the 24-hour performance history is
cleared. The date and time the 15-minute and 24-hour performance history was last cleared
appears at the bottom of the screen.

(17(5

(17(5

(17(5

(17(5

(6&

&75/

5

«
...
22
23
24
25
26
...
»

Содержание PG-PLUS PLL-734















































Отзывы:

Нет отзывов