All rights reserved Pacific Communications 2001
27
Fill
: When using the fill tool, clicking the mouse will fill that area of the image with boxes. If a
shape has been drawn with the line tool, clicking inside will fill the area with boxes. Clicking
outside the area will fill the outer area with boxes. If no shapes have been drawn, the entire screen
will fill with boxes.
Not
e: When you turn on the
Erase
button, you can use the tools as described above to delete
boxes.
•
Camera association: If motion is detected by one camera, other cameras can be associated with it
so that they will also be recorded.
•
Alarm association: Alarms may also be associated. The connected alarms will go off when a
related sensor is activated.
Tricks: If the Show Results is ticked, a blue type box will appear
when motion is detected. If you do not want this on, untick the Show
Results box and a little red square will appear in the bottom left
hand corner and will flash when motion is detected.
Using Motion Detection saves on hard drive space. It appears in
Green in the search menu. Only when motion detection does it
record.
A
LARM
S
ETUP
:
•
Select an alarm: Selects an alarm to set up.
•
Enable: Check the box to activate the alarm.
•
From/To (start/end times): Sets the hours the selected alarm is operational. An alarm may be
turned off during working hours.
Not
e: In case where the
From
hour is later than
To
hour, the alarm will be activated from the
From
time to the next day's
To
time.
