All rights reserved Pacific Communications 2001
20
S
ETTING UP
C
AMERAS
:
•
Select a camera: Selects a camera to set up.
•
Description: Title of the camera that is being set up.
•
PTZ: Enables or disables pan, tilt and zoom functions and set up details for PTZ . In traditional
PTZ control configurations, transmitter and receiver units are needed. The transmitter sends
control signals; the receiver receives the signals from the transmitter. The transmitter is built into
the IDR. The receiver is a separate component
•
Text for Hidden Camera: This will put a title when the camera has been locked.
•
Advanced Setup: Will allow user to set resolution for pre and post alarms. (See Advanced Menu)
•
Hide image: Display option. If the box is checked, the selected camera will not be displayed on the
monitor. (The images from that camera will be recorded, however.) It will however be available
on remote access and can be viewed on search. The spot output when sequencing will skip the
locked image.
•
SmartCapture: The IDR X016 captures the images very quickly using IDIS's unique technique,
SmartCapture. However, it is possible that some PAL type cameras can have shaky images after
executing the program. Uncheck the box next to SmartCapture for cameras having image shake
problem.
•
Same configuration for all cameras: If this option is checked, every camera will have the same
configuration.
•
Recording speed: Sets the recording speed for the time-lapse mode.
•
Post-event rec. speed: Sets the recording speed for the event-driven mode. If a related sensor is
activated, the IDR follows this setup. If a sensor is not activated, the IDR will not record.
•
Post-event rec. dwell: Sets the duration of event-driven recording.
