Pace TF 500, Инструкция по установке и эксплуатации

Страница: 17 / 31

13
Installation
Use the following instructions and accompanying illustrations as
a guide to assemble the Fiber Optic Lighting Attachment.
1. Orient the Light Bracket as shown on the Support
Arm.
2. Install the 2 enclosed Mounting Screws to secure
the Light Bracket in position on the Support Arm.
3. Place the Light Power Supply in position on the
Light Bracket. The 4 rubber feet on the bottom of
the power supply fit in the punched holes at the
corners of the bracket.
4. Install the Goose Neck Assembly onto the Light
Power Supply as shown. Secure in position with
the Locking Screw.
5. Plug the female end of the enclosed power cord
into the power receptacle on the rear panel of the
Light Power Source.
6. Plug the male end of the power cord into the house
AC supply.
Operation
1. Turn the power switch(on Light Power Supply
front panel) to the On position.
2. Position both necks of the Goose Neck Assembly
for best application of light to the workpiece.
3. Adjust the light intensity control knob (on Light
Power Supply front panel) for best light
brightness.
Replacement Lamp (Light Power Supply) - PACE Part
Number 1165-0027
Fiber Optic Lighting Attachment
For complete information on operation, servicing and
replacement parts of the VL405 Light Power Supply,
refer to the enclosed Operation Manual.