Pace TF 500, Инструкция по установке и эксплуатации

Страница: 13 / 31

9
ThermoFlo Handpiece
Operation
The ThermoFlo handpiece can be easily raised or lowered
using either of the Height Adjustment Knobs.
To provide repeatable clearance of an attached nozzle
assembly relative the the surface of PCB assembly (Nozzle-
to-PCB clearance), do the following:
1. Loosen the Locking Knob. The Clearance
Limiter Assembly will now fall down against the
Stop.
2. Lower the handpiece to the desired distance of
Nozzle-to-PCB clearance using the Height
Adjustment Knobs.
3. Ensure contact between the Clearance Limiter
Assembly and the Stop. Tighten the Clearance
Limiter Locking Knob to secure the Clearance
Limiter Assembly in position on the Vertical
Slide.