Pace TF 500, Инструкция по установке и эксплуатации

Страница: 12 / 31

8
ThermoFlo Handpiece
Installation
NOTE
If the Fiber Optic Lighting Attachment or any of the Vision Attachments
(Lens or Camera) have been purchased, they should be installed before
performing the following procedure.
1. Unscrew the Plastic Heat Shield (marked "HOT")
from the ThermoFlo handpiece and set aside.
2. Install the metal Swivel Ring (part number 1321-
0320) onto the ThermoFlo handpiece.
3. Turn the Locking Knob counterclockwise several
turns to release the Clamping Socket.
4. Pull the Locking Knob forward. The Clamping
Socket will swing open at the knob.
5. Place the ThermoFlo handpiece, positioned at an
angle with the heater down, through the center of
the Clamping Socket.
6. The Clamping Socket and the Swivel Ring (on
handpiece) form a ball and socket attachment
mechanism. Slide the Swivel Ring into the
Clamping Socket.
7. Straighten the ThermoFlo handpiece up into a
vertical position. Ensure that the Swivel Ring
remains inside the Clamping Socket.
8. Push the Locking Knob and turn clockwise to
secure the ThermoFlo handpiece in position.