5.Advanced User Guidebook
76
Figure 5-75 Wave of Vamp cursor measurement
Carry out the following operation steps for the Freq cursor measurement:
1.
Press
Cursor
and recall the Cursor Measure menu.
2.
Press the
H1
button, the
Type
menu will display at the right of the screen. Press the
F3
button to select
Freq
for
Type
, with two purple dotted lines displayed along the
vertical direction of the screen indicating the corresponding Cursor 1 and Cursor 2.
3.
According to the measured waveform, adjust the positions of Cursor1 and Cursor2 by
turning the
VERTICAL POSITION
knob
of CH1 and CH2. Increment window
shows two cursors difference value and the present position (see