Owon SDS-E Series, Руководство пользователя

Страница: 70 / 106

5.Advanced User Guidebook
65
Figure 5-61 Self-Calibration
Probe checking:
To check whether probe attenuation is good. The results contain 3 circumstances:
Overflow compensation, Good compensation, Inadequate compensation. According to the
checking result, users can adjust probe attenuation to the best. Operation steps are as
follows:
1.
Connect the probe to CH1, adjust the probe attenuation to the maximum.
2. Press Utility menu
，
press H1 and the function menu will display at the left of the
screen
，
turn the M knob to choose "Adjust", “ ProbeCh .”shows at the bottom menu
；
3. Press H4
，
choose “ ProbeCh .”
，
tips about probe checking shows on the screen
；
4. Press H4 again to begin probe checking and the checking result will occur after 3s;
Press any other key to quit.
Figure 5-62
：
Probe Checking