5.Advanced User Guidebook
24
Figure 5-4 Measure Current
4.
To invert a waveform
Waveform inverted: the displayed signal is turned 180 degrees against the phase
of the earth potential.
Taking the Channel 1 for example, the operation steps are shown as follows:
(1)
Press the
CH1 MENU
button to show the
CH1 SETUP
menu.
(2)
Press the
H2
menu selection button and select
ON
for
Inverted
item
.
The
waveform is inverted as it is shown in
(3)
Press the
H2
menu selection button again and select
OFF
for
Inverted
item.
The waveform goes back to its original one as it is shown in
