Owandy Radiology i-max touch 3D, Руководство пользователя

Страница: 59 / 119

User Manual
– Quality assurance program
NIMXEN020I
Owandy Radiology SAS 49
8.5 3D image quality check
The 3D image quality check is based on the usage of the 3D quality phantom (or equivalent) and
the software "QC tool".
The phantom consists of discs of PMMA with inclusions of different materials (PVC and Air) for
performing the required measurements. After the image acquisition, the volume is exported in
DICOM
Format from the imaging program into the “QC tool”.
The following paragraphs describe the tests to be performed for 3D image quality test.
8.5.1 "QC Tool" software
The "QC Tool" software can be started either from the desktop shortcut or directly from
QuickVision, by right clicking on the acquired 3D test image as described below.
After each test, record the measurements in the logbook provided in paragraph 8.5.12. At the end
of the test a report can be exported in .pdf and .csv format.
Once the 3D acquisition of the quality phantom is imported in the QC tool, a new test can be
started by clicking on "Start Quality Control Test".
In the first page of the QC tool the user can configure the test, by specifying the following
information:
•
Device
•
Phantom used
•
Tester information
•
Practitioner information
•
Type of test (Acceptance/Constancy)
•
Local regulation.
Once the test is set up, it can be started by clicking on "Start test".