Owandy Radiology i-max touch 3D, Руководство пользователя

Страница: 29 / 119

User Manual
– Cleaning and disinfection
NIMXEN020I
Owandy Radiology SAS 19
4. CLEANING AND DISINFECTION
In order to guarantee a good level of hygiene and cleaning, it is necessary to carry out the
following procedures.
Warning
Disconnect the unit from the mains before
performing any cleaning.
Do not let water or other liquids penetrate the unit, as these could cause corrosion or short circuits.
Use only a wet cloth and a mild detergent to clean
the painted surfaces, accessories and connection
cables and then wipe with a dry cloth. Do not use
corrosive or abrasive detergents (alcohol, benzene,
trichloroethylene, products containing quaternary
ammonium).
The centring bite or the bite protective sleeve must be replaced after each exam.
Thoroughly clean the chin support, resting handles and temple clamps group whenever they are
used.
The chin support, resting handles and temple clamps group should be disinfected (when
considered necessary) with a solution of 2% glutaraldehyde.
Note
To ensure a greater level of hygiene the handles of the equipment are covered with a
special antibacterial paint which, thanks to the emission of silver ions, reduces the
development of micro-organisms.