RDX QuikStation 4 and 8 Product Manual
1 - Product Overview
10400880-003
©2019-21 Overland-Tandberg
12
•
The RDX QuikStation 8, depending on the model, has four 1GbE ports, four 1GbE posts
along with one 10GbE port, or two 10 GbE ports.
You can configure the Ethernet ports for either bonded or split setup, depending on your needs
(see
Chapter 4, “Port Configuration Options,” on page 43
).
Compact Design
The RDX QuikStation 4 uses only one unit (1U) of rack space and is also available as a desktop
unit, while the RDX QuikStation 8 only uses two units (2U) of rack space, minimizing the
impact on data center space requirements.
RDX QuikStation 4 Components
This section describes the RDX QuikStation 4’s front panel and back panel components.
Front Components
RDX Cartridge Eject Button Status LED
The following table describes status LED color codes.
1 2
4 5
3
#
Description
1
RDX dock (four each)
2
Emergency-eject keyhole (centered above each dock)
NOTE: To use the emergency-eject function, use the Eject Key (included with
the RDX QuikStation) and insert it into the keyhole. You can also
straighten a paper clip and insert it into the keyhole. The paper clip
needs to be sturdy enough to engage the eject mechanism.
3
RDX cartridge eject button with Status LED (four each)
4
USB 3.0 port used for configuration and diagnostics
5
QuikStation power button with LED (green when power is ON)
LED
Status
Off (no color)
The dock does not have power.
Green
Power is ON and the dock is working properly.
Blinking Green
The RDX dock is ejecting the cartridge.
Amber
A fault condition exists with the dock.
Blinking Amber
Cartridge ejection is prevented.
