manualshive.com logo in svg

Overland Tandberg RDX QuikStation 4, Руководство по эксплуатации продукта

Поделиться
Скачать
Overland Tandberg RDX QuikStation 4 Скачать руководство пользователя страница 11

RDX QuikStation 4 and 8 Product Manual

1 - Product Overview

10400880-003

©2019-21 Overland-Tandberg

 

 

11

RDX QuikStation Features

This section provides an overview of the RDX QuikStation’s features.

Configuration Flexibility

You can configure the RDX QuikStation as individual RDX docks with removable iSCSI 
targets or as RDX logical volumes that combine the capacity of the RDX cartridges available.

RDX QuikStations 4 and 8 can be configured as a virtual tape library. You can also configure 
your RDX QuikStation as a disk autoloader which can automatically load the next cartridge 
when one is ejected.

You can configure the RDX QuikStation as either individual RDX docks with removable iSCSI 
targets or as RDX logical volumes.

•

RDX QuikStation 4 can be configured as four RDX docks with four removable iSCSI 
targets. It can also be set up as a single RDX logical volume combining the capacity of up 
to four RDX cartridges. The logical volume can be protected against the loss of a single 
cartridge.

•

RDX QuikStation 8 can be configured as eight RDX docks with eight removable iSCSI 
targets. It can also be set up as either a single RDX logical volume combining the 
capacity of up to eight RDX cartridges that can be protected against the loss of two 
cartridges or two RDX logical volumes each combining the capacity of up to four RDX 
cartridges and each can be protected against the loss of a single cartridge.

High Performance and Capacity

When configured as a virtual tape library emulating a Storage Loader LTO or StorageLibrary 
T24, the RDX QuikStation can simultaneously read and write from all RDX docks loaded with 
cartridges.

For example, an RDX QuikStation 4 with 5 TB cartridge in each dock configured as virtual 
tape library has an online capacity of 20 TB while an RDX QuikStation 8 with 5 TB cartridge 
in each dock has a capacity 40 TB.

In either case, offline storage capacity is unlimited.

Compatible with Major Backup Software

The RDX QuikStation is compatible with major backup software applications. For a complete 
list of backup software applications that are compatible with the RDX QuikStation, visit our 
Knowledge Base home page or contact your backup software vendor.

https://overlandtandberg.atlassian.net/wiki/spaces/KNOW/overview

Integrated Web-based Management

The RDX QuikStation web interface allows you to use a standard web browser from any 
location to manage, control, diagnose, and configure security for the RDX QuikStation.

Multi-Gigabit Ethernet

The RDX QuikStation appliances provide failover protection and high availability network 
connectivity.

•

The RDX QuikStation 4, depending on the model, has either two or four 1GbE ports.

Содержание RDX QuikStation 4

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды