D-160TS-7-E
26
12.3.2 Numeric Parameter Setting (e.g. Hi alarm)
Once parameter editing mode is active, the leftmost digit of the parameter starts blinking ("focused").
[SEL] to change the value of the focused digit and [ENT] to shift the focused digit to the right.
[ENT Hold] to confirm the change.
[SEL Hold] to cancel. (The previous setting will remain.)
There are two types of parameters with decimal point: fixed decimal point and exponent.
See 12.3.3 How to Read Exponent for details of exponent type.
ENT Hold
SEL Hold
Numeric parameter setting
ENT Hold
SEL
ENT
SEL
SEL Hold
ENT
ENT Hold
:Change value
:Cancel
:Move digit
:Confirm
[Parameter editing mode]
Parameter starts blinking once
parameter editing mode is active.
Automatically
returns to ①
The entire display blinks briefly to
notify that the change is confirmed.
[SEL] to change numeric values
[ENT] to move between digits
[ENT Hold] to confirm the change
[SEL Hold] to cancel
(parameter unchanged)
①
②
③
If the value input is out of the available range for parameters, the screen displays "Set Err" then
returns to editing mode
②
. Change the value and reconfirm or [SEL Hold] to cancel.
NOTE
: