otometrics MADSEN Midimate 622, Руководство пользователя

Страница: 65 / 102

The audiometer has two test modes for assisting the application
programmer in developing software and testing communication between
the MIDIMATE 622 and a computer.
1. Echo Mode
2. Display Received message
Echo Mode enables the communication between the audiometer and a
computer to be tested while “Receive” tests the interface by displaying a
correctly formatted message from the PC on the audiometer.
Please refer to the Data Interface Operation Manual (Part No. 7-25-920) for
further details.
10.4 PROGR.
From the Power-On Options Menu, select (User Test) Programming by
pressing Softkey 3 and the following will be displayed: SOFTKEY 3
Enable User programming ?
Yes No
Press Softkey 2 to revert to the Power-On Options Menu, and press Softkey
1 to proceed. SOFTKEY 1
User Test Programming is now enabled (see chapter 11 for details on this
option).
10.5 LANGUAGE
To alter Language from the default English, press Softkey 4 to access the
following menu: SOFTKEY 4
Select Language:
English
German French Italian Spanish
Press the corresponding softkey to select desired language and note that the
display automatically reverts to the Power-On Options Menu
in the
language selected .
Select Language
NOTE : If you select the wrong language by mistake, simply press Softkey 4
again to return to the Select Language Menu. You may now select the
desired language (the languages are always in the same order as above).
Press MENU to exit the Power-On Options Menu.
MENU
The selected language will be stored in memory, even after the audiometer is
switched off, i.e. after power-off, the audiometer will start up in the last
selected language when next switched on.
MIDIMATE 622 OPERATION MANUAL 10. Power-On Options
59