otometrics MADSEN Midimate 622 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 102

background image

2. INSTALLING THE MIDIMATE 622

2.1 UNPACKING AND INSPECTION

The MIDIMATE 622 is shipped in its own custom-made carton together with
this Operation Manual, a Packing Specification and standard accessories.
Please do

NOT

dispose of this carton in case the instrument needs to be

returned to your distributor for service or repair.

Unpacking

If the shipping carton is visibly damaged, ask the carrier's agent to be present
when the instrument is unpacked. If the instrument is damaged or fails to
operate, please notify the carrier and your distributor immediately. The
distributor will arrange for the repair or replacement of the instrument without
waiting for the claim against the carrier to be settled.

Inspection

Please check that all accessories are complete and intact (referring to the
enclosed

Packing Specification

).

Packing
Specification

2.2 STORAGE AND SHIPMENT

To protect the instrument and accessories during storage or shipment
always use the best packing available. If it is necessary to return the
instrument to your distributor or to the factory for repair, use the original
shipping cartons.

Storage & Shipment

When shipping the MIDIMATE 622, please remember the following:

1. Seal shipping container securely.

2. Mark container

FRAGILE

to ensure careful handling.

3. In any correspondence, please refer to the instrument by model
and serial number.

Always store the Midimate 622 in a clean, dry environment and never leave
the power on when left in an enclosed container!

CAUTION!

2.3 INSTALLATION

Site the instrument in a well-ventilated location away from sources of heat.

Siting

Connect the headset, the bone conductor, the patient response handswitch,
and any optional accessories to their respective connectors on the
Connection Panel located on the rear of the instrument (see Fig.1).

Connections

Note that the headphone jacks are color-coded: blue is for left, and red for
right. The plugs on the Connection Panel for both headphones (Phones) and
Free Field (FF) are clearly marked L for Left and R fior Right.

5

MIDIMATE 622 OPERATION MANUAL

2. Installing Midimate 622

«
...
9
10
11
12
13
...
»

Содержание MADSEN Midimate 622







































































































Отзывы:

Нет отзывов

Похожие инструкции для MADSEN Midimate 622

Бренд: Valor Страницы: 13

Бренд: Campbell Страницы: 31

Бренд: Callaway Страницы: 13

Бренд: Hanna Instruments Страницы: 2

Бренд: Dräger Страницы: 538

micro-TRI-gloss ?

Бренд: BYK Страницы: 174

Бренд: Kingfisher Страницы: 52

CHEM2000-UV-VIS

Бренд: Ocean Optics Страницы: 42

zelsius C5 -IUF

Бренд: Zenner Страницы: 28

Бренд: R&S Страницы: 46

Бренд: General Страницы: 16

Бренд: WIKA Страницы: 52

Бренд: Campbell Страницы: 42

Бренд: Purafil Страницы: 2

FST-2000 TestPad

Бренд: Acterna Страницы: 6

Бренд: Sonel Страницы: 88

Бренд: Omega Страницы: 12

Бренд: Saluki Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды