S
PECIFICATION
P
RODUCT
S
PECIFICATION
AND
C
ONFIGURATION
C
HAPTER
2
14
2.1.3
External dimensions
This section explains the external dimensions of the welding power source.
MS-MIG
(*5)
MIG
(100 % Ar)
(*1-3)
HARD ALUMINUM
1/16 (1.6)
1/16 (1.6)
STANDARD/HIGH
-
DC TIG
-
-
-
-
-
-
DC STICK
-
-
-
-
-
-
*1: Note that the "collective" voltage adjustment may not meet the appropriate condition if a mixing gas other than those with the
following mixing ratios is used.
*1-1: MAG gas: Argon (Ar) 80 % + Carbon dioxide (CO
2
)20 %
*1-2: MIG gas: Argon (Ar) 98 % + Oxygen (O
2
)2 %
*1-3: MIG gas: Argon (Ar) 100 %
*2: For "STANDARD" mode, the standard mode or extended cable mode (extended mode of power cable) is available.
(
6.7.2.1
-
F1: Standard/Extended cable mode)
*3: Two types of welding performances can be selected. (
6.7.2.19 F22: SUS EX pulse switching
-
)
*4: In the welding of DC low spattering, the following devices are necessary for wire feeder and welding torch. For details, refer to the
instruction manual of each device.
•
Wire feeder: CM-743U with voltage detection adaptor kit (K5975V00)
•
Welding torch: BT3500V-30 or BT3510V-30
*5: This mode is suitable for welding hard aluminum medium-thickness plates.
WELDING
METHOD
GAS (*1)
WIRE MATERIALS
WIRE DIA. [in. (mm)]
TRAVEL SPEED
Penetration
adjustment
WB-P402L
WB-P502L
18.1" (460 mm)
3.9" (100 mm)
28.0" (710 mm)
31.9" (810 mm)
15.6" (395 mm)
12.6" (320 mm)
