D
ATA
B
ACKUP
(U
TILIZATION
OF
DATA
)
A
DMINISTRATOR
F
UNCTIONS
C
HAPTER
7
128
7.3.4
Welding Result Control Function
The following contents can be saved in the file "DAIHEN_WELDING_MONITOR_DATA_MACHINE_***.CSV ".
•
Welding machine identification Number
•
Cumulative values of Welding result control function
The values of internal function F77(Welding result control function identifications numbers) enters into "***" in the end of
filename. (
6.7.2.56
-
F77: Welding result control function identification numbers)
7.3.5
Backup operation
This section explains how to back up the data such as welding conditions.
The data can be backed up in a USB flash drive.
T I P S
•
The USB flash drive to be used should be formatted as FAT32. If it is formatted as FAT16 or
NTFS, reformat it to FAT32.
1.
Turn ON the power switch.
2.
Insert the USB flash drive to the USB connector of the operation panel.
3.
Display “BACKUP” on the MENU screen.
●
Turn the screen operation knob to place the cursor on
“BACKUP”, and press the knob.
B
“ALL” or JOB No. (registration No.) is displayed on the
right digital meter in a flashing mode, and the LED of
“JOB” lights up.
B
“USb” is displayed on the left digital meter.
Welding machine identification
Number
Cumulative values of Welding
result control function
/2$'-2%
6$9(-2%
:(/'021,725
.(</2&.㸸
%$&.83
5(6725(
0(18
2))
㸭21
+20(
6(/(&7
(17(5
