Orion BuckEye Cam RC-5030, Руководство пользователя

Страница: 16 / 62

14 5. Portable System Setup
If the base cannot find a camera it will show
NO CAM
rEG
on the display.
If that happens make sure the camera is turned on and antennae are
connected to both base and remote camera. Repeat steps 1 through 5.
5.3. Unregistering Camera from a Portable Base
To properly unregister a camera from a Portable Base, the CAMERA
MUST BE TURNED ON and located in close proximity to ensure reliable
unregistration. Do not turn off the camera or Portable Base until the
following process is complete.
To unregister the camera from the Portable Base:
1. Make sure the camera you want to unregister is turned on and
located near the Portable Base.
2. Press MENU button on your Portable Base.
3. Using UP / DOWN buttons scroll through the menu until you see
DelCAM on the display.
4. Press SELECT button
5. Using UP / DOWN buttons choose the appropriate camera number
you want to unregister. The camera number will be shown in the
upper right corner of the display. Example:
C-01
corresponds to
camera #1,
C-02
corresponds to camera #2, etc.
6. Once you have chosen the correct camera number press SELECT
button
7. Using UP / DOWN buttons select
YES
on the display to confirm
your intention to unregister the selected camera.
8. Press SELECT button to initiate unregistration. The camera will
be automatically unregistered from the Portable Base.
Upon successful unregistration, the Portable Base will display
UnREGD
C-01
with the camera number in the upper right hand corner. At
the same time, the camera will reboot into an unregistered state. At that
point the camera can be registered to another base, switched to a stand-
alone camera, or switched to a Portable Base.
If the Portable Base cannot communicate with a camera, it will say
FAILED
UrEG
. If that happens, make sure the camera is turned on, antennas
are properly connected, and repeat the process from step 1.
NOTE: In some cases the user may need to unregister the camera the
user no longer has. For that case, the user can force unregistration of
the camera from the base.
ORION - Owner's Manual, Rev. 3.6