Orion BuckEye Cam RC-5030, Руководство пользователя

Страница: 53 / 62

9. Camera Operation and Maintenance 51
9.5. Using the Optional Solar Charger
The Solar Charger provides a constant charge to the battery which reduces
the number of trips to the Camera site. The Solar Charger is not required
for the camera to operate.
To ensure an efficient operation of the Solar Charger:
•
Mount the panel so that it can be exposed to the most sun light
throughout the course of the day. It is generally recommended to mount
the charger facing South. If you are living in the southern hemisphere
(South America, Africa, Australia) mount the Solar Charger facing
North.
•
Make sure falling leaves will not cover the panel. Efficiency of the
panel can be significantly reduced even when only one segment (cell) is
covered.
•
Do not place the panel on the ground as it may get covered with leaves
and dirt.
•
In winter, make sure the panel is not covered with snow.
9.6. Reading Firmware Version and Serial Number
To get the firmware version, the serial number at the camera:
1. Press MENU button
2. Using UP / DOWN buttons select INFO .
3. Press SELECT button
4. The version number will be
displayed as show to the right.
C-01 in the upper right corner of
the display indicates that this unit is
registered as Camera #1. On a portable base,
BASE
will be show
on the display. For a standalone camera
CA
is shown. If the
camera is not registered, C--- will be shown.
5. Press DOWN button
6. The serial number will be displayed
as shown to the right.
-Sn-
in the
upper right hand corner indicates
that the serial number is on the
display. In this example the serial number is A01LKB.
7. Press DOWN button
8. Network address and channel are
displayed as shown to the right.
Here, the first digit before the
asterisk (
*
) is the channel number
ORION - Owner's Manual, Rev. 3.6