Orion BuckEye Cam RC-5030, Руководство пользователя

Страница: 20 / 62

18 5. Portable System Setup
This software allows you to choose settings and edit text that you would
like displayed on the pictures for each registered camera including the
camera acting as base. You select the camera by clicking on the
corresponding button on the left had side. If you only have one camera,
only one button will appear. When more cameras are added, more buttons
will appear. By default, the cameras are listed by their index. You can
choose to list cameras by names or locations by clicking on the
button and selecting the corresponding option.
Please note, that for a stand-alone camera, the camera buttons on the left
will not be shown.
To change the camera settings, select the options you want by clicking on
the corresponding check box and filling in the fields. If you make any
changes, the
button at the bottom of the window is enabled and
the corresponding camera button is marked with a green dot. When you are
done updating settings, click the
button to save the changes and
close the software. After that, you can remove the card from the card
reader. Insert the card into the card slot on the Portable Base to update
settings on any of the remote cameras or the base. The base will
automatically detect new settings on the card and show
SetOUT
on the
display. Once settings are updated for a camera a message SetOK is
displayed with corresponding camera number
C-01
in the upper right hand
corner. When all cameras are updated, the display will show
SetOK
ALL .
If the settings were modified for a stand-alone camera, insert the card into
that camera. The stand-alone camera will detect new settings on the card
and show a
SetOK
message on the display. This indicates that the new
settings were accepted.
Camera Options :
In the settings software, you can enter up to 4 custom text labels onto the
picture. To add a label to the picture, place a check box next to the text
field and type in the text. You can enter 31 characters into Text 1, Text 2,
and Text 3, and up to 63 characters into Text 4. Please note, as you click
on a text box, the location of the corresponding label is highlighted in the
sample picture in the upper right hand corner.
The date, time, temperature, and moon phase at the time the picture was
taken can also be stamped on the picture. Click on the corresponding check
boxes to add or remove the stamps from the picture. Location of the stamp
will also be highlighted in the sample picture area.
ORION - Owner's Manual, Rev. 3.6