Orion BuckEye Cam RC-5030, Руководство пользователя

Страница: 26 / 62

24 5. Portable System Setup
To test the signal strength at the camera, press the SIGNAL button. The
camera will make several attempts to contact the base. During that process
you will see
-WAIT-
message on the display. If the camera is able to
contact the base and get the signal measurement, you will see a message
similar to the one to the right. The bar at the
top of the display indicates the signal
strength.
BASE
at the top right corner of the
display indicates the the signal was
measured at the base indicating how well the base can “hear” the camera.
If the camera cannot “talk” to the base the message on the display would
be
NO COM
.
You can also measure the signal from the base to the camera. For that:
1. Press SIGNAL button on the Portable Base
2. Using UP / DOWN buttons select the camera for which you want
to measure the signal strength. The camera number will be shown
in the top right corner of the display.
3. Press SELECT button to command the base to measure signal to
the selected camera.
The base will make several attempts to
contact the camera. If communication was
successful, you will see a message similar
to the one to the right.
C-01 indicates
Camera #1. The bar at the top of the display
indicates the signal strength at the camera indicating how well the camera
can “hear” the base. If the base cannot “talk” to the camera the message on
the display would be
NO COM
.
5.8. Checking Battery Level
To check the battery level on the Portable
Base press the
BATTERY button. The
battery level will be displayed as shown to
the right. The bar at the top will display the
actual battery level. When the battery level
drops below 2 bars, the battery will need to be charged.
To check the battery level on a remote camera from the Portable Base:
1. Press the BATTERY button on the Portable Base
2. Using UP/DOWN buttons scroll to select the camera number on
which you want to check the battery level. The camera number
will be shown in the upper right corner of the display as
C-01
for
ORION - Owner's Manual, Rev. 3.6