Orion BuckEye Cam RC-5030, Руководство пользователя

Страница: 18 / 62

16 5. Portable System Setup
the display. At this point, the user can register the camera to another base
or switch it to another mode such as Portable Base or stand-alone camera.
5.5. Changing Time and Date
NOTE: The BuckEye Cam ORION uses Military settings when
displaying the time. The time and date is maintained with a 3V Lithium
battery located next to the On/Off switch.
You only need to set the Time and Date on the Portable Base. The Remote
Camera(s) will be updated automatically when it communicates with the
base.
To change the on the Portable Base:
1. Press and hold the SET CLOCK button for two seconds until
HOURS
appears on the display. Release the SET CLOCK button.
2. Press the UP or DOWN buttons to set the Hour.
3. Press the SET CLOCK button to display
MINUTE
.
4. Press the UP or DOWN button to set the Minute.
5. Repeat steps 3 and 4 to update
SECOND
,
DAY
,
MONTH
, and
YEAR . Note, when updating seconds, pressing UP / DOWN button
will reset the seconds to 00.
After the time is changed, the Portable Base will automatically notify the
cameras about the new time and date, and the clock the the Remote
Cameras will be synchronized to the clock on the Portable Base.
5.6. Changing Settings on the Camera
Settings for a remote cameras can be changed at the Portable Base through
a memory card using a special program located on the memory card. Any
time a card is inserted into the Portable Base, the base verifies and make
sure the software to change settings and the settings file are present on the
card. If the software or settings file is not present, or the file is corrupted,
the base copies the files to the card. This is done automatically and no user
intervention is required.
To copy the setup software to the memory card:
1. If the memory card was not inserted, insert the memory card into
the card slot on the Portable Base. For stand-alone camera, insert
the card into the card slot on the camera.
2. The WAIT light will flash once. If the light stays on for longer
than 1 second it means that the program is copied to the memory
card.
ORION - Owner's Manual, Rev. 3.6