Orion BuckEye Cam RC-5030, Руководство пользователя

Страница: 35 / 62

6. PCBase System Setup 33
good battery in and unplug the bad battery after that to restore the
communication without losing pictures. If a solar panel is connected to the
camera and exposed to enough sunlight, the camera will resume its
operation when the battery is charged to about 30%.
Updating settings:
This message is displayed below the status indicator when the PCBase is
transferring new settings to the camera.
Received pictures:
This indicator is incremented every time PCBase receives a picture from
the camera. You can use this counter to track how many pictures were
received from the camera during some period of time. The counter can be
reset by click on the
button.
6.6. Changing Camera Settings
To change camera settings click the button. This will open
a dialog similar to the one used to change settings on a portable system
(see picture on page 17). Refer to camera options on page 18 for
description of different settings that can be changed on a remote camera.
Once you are done modifying settings for a camera or a number of
cameras, click the Update button. The PCBase will start updating settings
on cameras one by one. The cameras that need their settings updated will
have an
status displayed on the panel. Once the settings are
updated, the status disappears and a message “Settings Updated” is
displayed in the message window.
NOTE: If you need to stop the PCBase and close the software before the
new settings are transferred to the cameras, you can safely do that. The
PCBase will restart the unfinished settings transfer next time it is
launched.
6.7. Changing PCBase Settings
To change PCBase settings click the button. This will open
a dialog window as shown below.
ORION - Owner's Manual, Rev. 3.6