Origio MARS 1200 CLASS II, Руководство пользователя

Страница: 36 / 75

36 Version 4.2: Aug 26, 2015
When turning ON the reduced speed velocity, the internal light will turn off to
alert the user. The internal light can be switched on again if needed.
Alarm
When an alarm is activated an audible acoustic signal is activated. On the control panel a small
red light is activated on the Alarm button. Press the Alarm Button to mute the acoustic alarm
signal but, the red alarm light will be continue light up unto the alarm case has been solved.
The error causing the alarm will be explained on the LED display.
When the error has been fixed the audible alarm and the small red light are switched off.
Muting the acoustic signal will not remove the problem that caused the error.
a. Internal light
To switch ON the illumination light of the work chamber, press the “4-Internal Light” button.
When activated, a small blue light on top of the button will switch on.
To switch OFF the illumination light of the work chamber, press the “4-Internal Light” button
again. The small blue light on top of the button will be OFF.
To adjust the light intensity, refer to the section “Adjusting the level intensity
of the internal light”.
b. UV light
The UV light and UV light timer are optional features.
For increased safety against unintended UV radiation which will harm eyes
and skin, use the timer to start the UV decontamination when no personnel is
present in the room where the workstation is located.
To program the UV light time, refer to the section “Programming and Controlling the
UV light timer”.
To switch ON the UV light for decontaminating the work chamber, press the “5- UV Light” button.
When activated a small yellow light on top of the button will switch on