Origio MARS 1200 CLASS II, Руководство пользователя

Страница: 51 / 75

Version 4.2: Aug 26, 2015 51
V. OPERATION
a. Preparation for the sample chamber
The sample chamber surfaces and the accessories required for the work process must be disinfected and cleaned
in accordance with the hygiene guidelines set for the application and the standard operating procedures of the
laboratory.
b. Working in the sample chamber
The observance of work rules ensures a minimum of operational safety when handling the workstation.
Before starting an operation:
• Take off jewelry.
• Put on required personal protective gear, e.g. gloves, face, or body protection.
• Clean and disinfect sample chamber surfaces at regular intervals.
• Follow your internal standard protocols
During operation:
• Place samples only within the defined work area of the work plate.
• Do not place unnecessary items into the sample chamber.
• Use only disinfected and cleaned accessories for the work process.
• Do not cause air turbulence, by quick hand, arm or body movement in the sample chamber or in front of
the work opening.
• Do not place accessories into the sample chamber that cause air turbulence or emit excessive heat (e.g.
gas burner).
• Do not block air circulation at the ventilation slots of the work plate.
Sitting posture during work:
To prevent risks to health, a height-adjustable working chair with an adjustable seat back should be used during
extended work periods at the workstation.
• When the forearm rests on the work plate, it should be in an almost horizontal position
• When the thigh is in a horizontal position, the angle between thigh and lower leg should exceed 90°.
• To ensure compensation between floor and sitting height, use a footrest. (not provided)