Origio MARS 1200 CLASS II, Руководство пользователя

Страница: 16 / 75

16 Version 4.2: Aug 26, 2015
III. INSTALLATION
CAUTION:
The installation of the workstation must be completed by a certificated or technically
trained engineer approved by ORIGIO or our authorized distribution network
a. Ambient Locations
The operational safety and proper function of the device depend on the location where it is to be used. The device
must be operated only at locations that meet the ambient conditions listed below.
Location requirements:
o
The electrical system of the device has been designed for an operating height of up to 2000 m (6500 ft.)
above sea level.
o
The mains power supply outlets should be out of normal reach to prevent accidental shut-off, but within
easy access for disconnection.
o
The flooring of the location must be adequately strong.
o
The room in which the device is installed must be of adequately height. The distance between the exhaust
air opening and the room ceiling must be at least 200 mm (8 in).
o
The location must be equipped with an appropriate ventilation system.
o
The temperature within the room must be between 15 °C and 35 °C (68 °F and 95 °F)
o
The relative humidity in the vicinity of the device must not exceed 80%.
o
Choose a draft-free location where the workstation does not interfere with the room traffic.
o
The device should be placed on a level secure surface, away from heaters, coolers and air-conditioning
outlets.
Temporary Storage: If the device is stored only temporarily (up to four weeks), the
ambient temperature may be b5°C and 40°C (4 1°F and 104°F). For longer storage
periods, the location requirements apply.
Installation in Line: When several devices are to be installed in line, make sure that
vibrations cannot be transferred between adjacent units. Give 254 mm (10 in) clearance
between the workstations or side proximity to enable cleaning and disinfection.