Origio MARS 1200 CLASS II, Руководство пользователя

Страница: 33 / 75

Version 4.2: Aug 26, 2015 33
d. Device interfaces
The standard equipment includes two electrical outlets for internal power supply of accessories.
Maximum 200 W per outlet
Electrical data of internal outlets
Rated voltage: 230/115 VAC, 50/60 Hz
Fusing: T 3.5A/230V, T 4A/115V
e. Chamber Illumination
Two light tubes are installed in a MARS Workstation between the laminator air
panel and the HEPA filter.
f. Working Area
Depending on the size of the workstation, the MARS LAF working area consists of several stainless steel work
plates (A, B, C, D) placed onto the frame above the sample chamber floor pan. For cleaning of the floor pan, the
work plates (A,B,C,D) can be lifted with the handles mounted in the grille.
The working area extends to the whole surface as indicated in yellow the figure below.
g. UV Light
The UV Light (optional) for disinfection of the unit is located on the front below the HEPA filter and lodged in a
compartment as indicated in the picture below.
WARNING: The radiation of the UV-lamps causes skin burns and conjunctivitis within
minutes. For this reasons skin and eyes must be protected from direct radiation. The use
of the UV light shield cover is mandatory during a UV light decontamination.