OPTIMUM
M A S C H I N E N - G E R M A N Y
Operation
Version 1.0.1 dated 2016-02-23
Page 49
Original operating instructions
MZ4
│
MZ4V
GB
4.17
Conversion to vertical milling
Dismantle the protective cover (1) for the "Vertical milling" spindle drive.
Position the coupling nose of the vertical spindle horizontally (2).
Position the coupling nose of the spindle drive horizontally (3).
Swivel the vertical milling head on the spindle drive (3).
Tighten the hexagon screws and hexagon socket screws.
4.18
Coolant
WARNING!
Discharge and overflow of cooling lubricants and lubricants Ensure that cooling
lubricants are not discharged onto the floor. Any cooling lubricants that run onto the
floor must be removed immediately.
The coolant delivery is switched on and off via a switch on the control panel.
0 = switch off coolant delivery.
1 = switch on coolant delivery.
The amount of coolant is adjusted using the metering valve.
3
1
2
