OPTIMUM
M A S C H I N E N - G E R M A N Y
Appendix
Version 1.0.1 dated 2016-02-23
Page 112
Original operating instructions
MZ4
│
MZ4V
GB
7.6
Advice for disposal / Options of re-use
Please dispose of your machine in an environmentally friendly way, not by disposing of the
waste not in the environment, but by acting in a professional way.
Please neither throw away the packaging nor the used machine later on, but dispose of them
according to the guidelines established by your city council/municipality or by the corresponding
waste management enterprise.
7.6.1 Decommissioning
CAUTION !
Immediately decommission used machines in order to avoid later misuse and
endangering of the environment or of persons.
Cut the connection cable.
Remove all environmentally hazardous operating fluids from the used device.
If applicable remove batteries and accumulators.
Disassemble the machine if required into easy-to-handle and reusable assemblies and
component parts.
Dispose of machine components and operating fluids using the intended disposal
methods.
7.6.2 Disposal of new device packaging
All used packaging materials and packaging aids from the machine are recyclable and gener-
ally need to be supplied to the material reuse.
The packaging wood can be supplied to the disposal or the reuse.
Any packaging components made of cardboard box can be chopped up and supplied to the
waste paper collection.
The films are made of polyethylene (PE) and the cushion parts are made of polystyrene (PS).
These materials can be reused after reconditioning if they are passed to a collection station or
to the appropriate waste management enterprise.
Only forward the packaging materials correctly sorted to allow direct reuse.
7.6.3 Disposal of the machine
INFORMATION
Please take care in your interest and in the interest of the environment that all
component parts of the machine are only disposed of in the intended and admitted way.
Please note that the electrical devices comprise a variety of reusable materials as well as
environmentally hazardous components. Please ensure that these components are
disposed of separately and professionally. In case of doubt, please contact your
municipal waste management. If appropriate, call on the help of a specialist waste
disposal company for the treatment of the material.
7.6.4 Disposal of electrical and electronic components
Please make sure that the electrical components are disposed of professionally and according
to the statutory provisions.
The device is composed of electrical and electronic components and must not be disposed of
as household waste. According to the European Directive 2002/96/EC regarding electrical and
electronic used devices and the implementation of national legislation, used power tools and
electrical machines need to be collected separately and supplied to an environmentally friendly
recycling centre.
