OPTIMUM
M A S C H I N E N - G E R M A N Y
Appendix
Version 1.0.1 dated 2016-02-23
Page 111
Original operating instructions
MZ4
│
MZ4V
GB
The following items are also not subject to liability or warranty claims:
- Wearing parts and components which are subject to a standard wear as intended such
as e.g. V-belts, ball bearings, illuminants, filters, sealings, etc.
- Non reproducible software errors
Any services, which OPTIMUM GmbH or one of its agents performs in order to fulfil any
additional warranty are neither an acceptance of the defects nor an acceptance of its obli-
gation to compensate. These services neither delay nor interrupt the warranty period.
The court of jurisdiction for legal disputes between businessmen is Bamberg.
If any of the aforementioned agreements is totally or partially inoperative and/or invalid, a
provision which nearest approaches the intent of the guarantor and remains within the
framework of the limits of liability and warranty which are specified by this contract is
deemed agreed.
7.5
Storage
ATTENTION!
Incorrect and improper storage might result in damage or destruction of electrical and
mechanical machine components.
Store packed and unpacked parts only under the intended environmental conditions.
Follow the instructions and information on the transport box:
Consult Optimum Maschinen Germany GmbH if the milling machine and accessories are stored
for more than three months or are stored under different environmental conditions than those
specified here.
"Environmental conditions - storage“ on page 22
Fragile goods
(Goods require careful handling)
Protect against moisture and humid environment
Prescribed position of the packing case (Marking
of the top surface - arrows pointing to the top)
Maximum stacking height
Example: not stackable - do not stack further
packing case on top of the first one.
