Optics11 CHIARO NANOINDENTER Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 65

Optics11 CHIARO NANOINDENTER Скачать руководство пользователя страница 57

57

7.

THE OP1550 INTERFEROMETER

The interferometer operates as stand-alone device and can be switched on or off any time the
Piuma Nanoindenter system is in stand-by. The OP1550 interferometer contains a tunable laser
source, modulation options, a high-speed photodiode and data acquisition electronics.

The OP1550 interferometer is configured using the five buttons on the front panel that allow to walk
through the menus and select and alter menu items. In order to select a field or button on the
OP1550 screen, move the cursor over the button or field and press the center button (enter). In case
a field is selected, the field will turn blue and the up and down buttons can be used to alter the
value the cursor highlights.

The interface is built up out of two menus. The first menu (Measurement, Wavelength scan,
Demodulation and Settings) can be accessed using the buttons on the top of the screen. The
second menu (Laser, ADC, Output, Modulation and Maintenance) can be accessed by scrolling
from left to right while keeping the cursor in the right-hand side of the screen.

Figure 52: The OP1550 interferometer.

«
...
55
56
57
58
59
...
»

Содержание CHIARO NANOINDENTER


































































Отзывы:

Нет отзывов