Opticon LG2 Series, Руководство пользователя

Страница: 66 / 113

LG2 User’s Manual 25-ULG2MU01-02 - 58
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 59
Save Settings
9.4 - VGA & Megapixel Settings
User’s may optimize the LG2 unit’s megapixel (SXGA) imager (1280 x 1024) to a VGA (640 x 480). This
feature is used to decrease the pixel sampling area, which will greatly increase processing speed. This is
an advanced feature used for the rapid decoding of 1-dimensional/linear barcodes and larger module size
2-dimensional barcodes. Opticon recommends testing this feature, as it will not work with many high density
Enable VGA - 640 x 480 Enable SXGA - 1280 x 1024 (Default)
User’s may also set the triggers on the reader to VGA or Megapixel mode:
Enable VGA Left Trigger Enable SXGA Left Trigger (Default)
Enable VGA Right Trigger Enable SXGA Right Trigger (Default)
Enable VGA Handle Trigger Enable SXGA Handle Trigger (Default)
9.5 - Mirroring
Scan the following barcodes to enable/disable the mirroring feature:
On Off (Default)
Note: The Mirroring feature allows the LG2 to read barcodes as they are seen through a mirror (inversed
180°). If the Mirroring feature is enabled, all other barcode reading ability will be disabled. This feature may
only be utilized with firmware version 1242 or greater. Please contact your Opticon if you have any ques-
tions.