Opticon LG2 Series, Руководство пользователя

Страница: 64 / 113

LG2 User’s Manual 25-ULG2MU01-02 - 56
Save Settings
LG2 User’s Manual 25-ULG2MU01-02 - 57
Save Settings
9.1 - Decode Time & LED’s for Non Standard Inks
The default settings for the LG2 are designed for optimal, general purpose performance with good qual-
ity symbols on typical surfaces. For poor quality barcodes or barcodes on non-standard surfaces (shiny,
low-contrast), the unit may require:
1) More time to process the barcode before the system abandons the image
and restarts on a new decode attempt.
2) May require manipulating LED’s.
To allow for additional processing time or to change the LED settings for marginal symbols, scan one of
the following barcodes:
Note: Utilizing this feature may affect the overall performance of the reader, but
“unreadable” barcodes may become readable.
Short Decode Time Normal Decode Time (Default) Long Decode Time
Extra Long Decode Time LED’s for Non Standard Inks ON LED’s for Non Standard Inks OFF
(Default)
9.2 - Set Targeting Zone Tolerances
Scan one of the following barcodes to set the decode accuracy of the LG2 unit. The 50 setting is the
most accurate while the 1600 barcode is the most tolerant (If you set the unit to a 50 setting, you have to
aim the targeting dot directly on the desired barcode for it to be read).
50 75 100 125
150 200 400 1600 (Default)