manualshive.com logo in svg

Opex Perfect Pick Cortex, Руководство оператора, Страница: 130 / 134

Поделиться
Скачать
Opex Perfect Pick Cortex Скачать руководство пользователя страница 130

130

Glossary

Perfect Pick® Cortex™ Operator Manual

OPEX Corporation

Host

 - This software provides the main interface with the system’s controls. 

Used primarily by the OPEX technician (or qualified personnel), the Host 
software is used to select and run jobs, remove/insert iBOTs, run diagnostic 
tests, and view statistical reports on the Perfect Pick.

iBOT

 - Automated cars used to deliver totes to the operator station for picking 

or replenishing items.

Interlock

 - A safety device that shuts the system down when tripped.The E-

Stops are interlocks. Interlocks are also on the front and rear doors.

I/O enclosure

 - This enclosure houses the main I/O board. This is the go 

between for the system to talk to our host PC and the customer’s system. It is 
the source of the triggering, and pacing of the objects or packages.

Jam

 - A problem with the system, typically (but not always) caused by a 

blockage.

Job

 - A collection of the settings and methods the system will use to process 

items in a similar fashion from run to run. In many cases, you will only see one 
job, which should be set up ahead of time, either by an OPEX technician or 
your site supervisor or IT department.

Lock out tag out

 - This is a safety device. When you are servicing the machine, 

you turn it off. The Lock out Tag out switch is on the front of the AC enclosure. 
When you are going to service the machine, you should put a lock on this 
device to ensure that no one will turn the machine on while you are servicing it.

Manager

 - Person who creates operators and has access to most of the 

machine’s controls and features.

Operator

 - The person running the machine. Operators have very limited 

access to system controls and settings.

OPEX scan tunnel

 - The Barcode system tunnel that reads the barcodes on the 

containers or boxes.

Path sensor

 - Used to provide feedback as to the location of an item in the 

system.

PC Host

 - The Host PC is the main computer used in the system.

Run State

 - The operational state that produces outputs allowing the system to 

operate in what may be considered normal operation.

Содержание Perfect Pick Cortex







































































































































Отзывы:

Нет отзывов