Opex Perfect Pick Cortex Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 134

Opex Perfect Pick Cortex Скачать руководство пользователя страница 12

12

Safety

Perfect Pick® Cortex™ Operator Manual

OPEX Corporation

2.1. Safety Guidelines

This section provides safety guidelines to be observed when working with this
equipment.
The Perfect Pick HD® and OPEX Workstation adhere to the NFPA 79 electrical
standard for industrial machinery, which provides safeguards to protect
operators, equipment, facilities, and work-in-progress from fire and electrical
hazards.

Familiarize yourself with the location of the Emergency Stop (E-stop) switch
and pull-cord.

The E-Stop switches and E-stop pull-cord enable a quick stop of all motors in
the machine, in the event of an emergency involving potential personnel injury.
Pressing an E-Stop switch or pulling the E-stop pull-cord stops movement of
the conveyor.

Electrical Safety

- Always assume electrical wiring is hot any time the machine

is plugged in. Failure to use caution may result in severe bodily injury or death
from electric shock.

Use caution to avoid contact with exposed, non-insulated areas of any
electrical devices or wiring.

Never handle or place a tool on the exposed terminals of any electrical device,
such as a circuit breaker, transformer, switch, relay, terminal block, fuse block,
for example, without first shutting off all power to that device.

Ensure that all electrical outlets and extension cords are equipped with a third
earth grounding conductor-to-chassis ground.

Keep loose objects away from any exposed, moving parts of the machine

- The

moving parts of the Perfect Pick Integrated Work Station can become jammed
and/or damaged by foreign objects. Keep hands, hair, loose clothing and
jewelry away from the moving parts.

CAUTION

Follow these safety guidelines whenever installing, operating, servicing, or
maintaining the equipment described in this manual.

«
...
10
11
12
13
14
...
»

Содержание Perfect Pick Cortex







































































































































Отзывы:

Нет отзывов