Opex Perfect Pick Cortex Скачать руководство пользователя страница 129 | Manualshive

Страница: 129 / 134

Opex Perfect Pick Cortex Скачать руководство пользователя страница 129

Glossary

129

Perfect Pick® Cortex™ Operator Manual

OPEX Corporation

G.2. List of Terms

The following list of terms, used throughout the Cortex™ documentation, is
sorted alphabetically.

AC Distribution Enclosure

- This is the AC input module found in the input

section above the UPS. This is the main AC input to the machine. This also
contains the Lock out tag out feature for safely working on the machine. Only a
qualified technician or authorized personnel should work within the machine.

Affected Employee

- An employee whose job requires him or her to operate or

use a machine or equipment on which the servicing or maintenance is being
performed under lockout or tagout, or whose job requires him/her to work in an
area in which such servicing or maintenance is being performed.

API

- Application Programming Interface. A set of subroutine definitions,

protocols, and tools for building application software. In general terms, it is a
set of clearly defined methods of communication between various software
components.

Authorized Employee

- A person who locks out or tags out machines or

equipment in order to perform servicing or maintenance on the machine or
equipment.

Back-end

- This is used as a reference to the customer’s servers. Other

common names may be warehouse management system (WMS), warehouse
control system (WCS), or simply the customer’s servers.

Barcode

- This is the identifier on a package that is made up of a series of lines.

These are read by the OPEX scan tunnel and/or optional barcode reader to
identify the package.

Bin

- Bins, totes, or boxes are the terms used for the container in which the

product gets delivered.

Conveyor

- A mechanical assembly used for moving items from one place to

another.

E-Stop

- Short for “Emergency Stop,” this is a mechanical safety device that

shuts part or all of the machine down when pressed.

«
...
127
128
129
130
131
...
»

Содержание Perfect Pick Cortex







































































































































Отзывы:

Нет отзывов