Opengear ACM5000, Руководство пользователя

Страница: 271 / 335

Console Server & Router User Manual
271
Below is an example using ping-detect to power cycle an RPC (PDU) outlet whenever a specific host fails to respond to a
ping request. The ping-detect is run from /etc/config/rc.local to make sure that the monitoring starts whenever the system
boots.
So if we assume we have a serially controlled RPC connected to port01 on a console server and have a router powered
by outlet 3 on the RPC (and the router has an internal IP address of 192.168.22.2). The following instructions will show
you how to continuously ping the router and when the router fails to respond to a series of pings, the
console server will
send a command to RPC outlet 3 to power cycle the router, and write the current date/time to a file:
- Copy the ping-detect script to /etc/config/scripts/ on the console server
- Open /etc/config/rc.local using vi
- Add the following line to rc.local :
/etc/config/scripts/ping-detect 192.168.22.2 /bin/bash -c "pmpower -l port01 -o 3 cycle && date" > /tmp/output.log &
The above command will cause the ping-detect script to continuously ping the host at 192.168.22.2 which is the router. If
the router crashes it will no longer respond to ping requests. If this happens, the two commands pmpower and date will
run. The output from these commands is sent to the file /tmp/output.log so that we have some kind of record. The ping-
detect is also run in the background using the "&" .
Remember the rc.local script is only run by default when the system boots. You can manually run the rc.local script or the
ping-detect script if desired.
The ping-detect script
The above is just one example of using the ping-detect script. The idea of the script is to run any number of commands
when a specific host stops responding to ping requests. Here are details of the ping-detect script itself:
#!/bin/sh
# Usage: ping-detect HOST [COMMANDS...]
# This script takes 2 types of arguments: hostname/IPaddress to ping, and the commands to
# run if the ping fails 5 times in a row. This script can only take one host/IPaddress per
# instance. Multiple independent commands can be sent to the script. The commands will be
# run one after the other.
#
# PINGREP is the entire reply from the ping command
# LOSS is the percentage loss from the ping command
# $1 must be the hostname/IPaddress of device to ping
# $2... must be the commands to run when the pings fail.
COUNTER=0
TARGET="$1"
shift
# loop indefinitely:
while true
do
# ping the device 10 times
PINGREP=`ping -c 10 -i 1 "$TARGET" `
#get the packet loss percentage
LOSS=`echo "$PINGREP" | grep "%" | sed -e 's/.* \([0-9]*\)% .*/\1/'`
if [ "$LOSS" -eq "100" ]
then
COUNTER=`expr $C 1`
else
COUNTER=0
sleep 30s
fi
if [ "$COUNTER" -eq 5 ]
then
COUNTER=0