45
Installation & Operation Guide: Oncam Grandeye 360
o
Evolution Camera Range
Version 2.4 | January 2014 | Oncam Grandeye, 115 Hammersmith Road, London. W14 0QH. UK
T: +44 (0)20 7371 6640 | E: [email protected] | W: www.oncamgrandeye.com
11.4
Privacy tab
1.
Give the R egion a Name
2.
C lick on S tart under Drawing
3.
Left click to set your initial point, then click again several times until you have defined a polygon
4.
Press the S ave to store these settings
Notes:
o
Privacy R egions are enabled when created. You may disable them by un-checking Enable R egions.
o
Each region can be turned on or off by selecting the In Use checkbox.
o
If a region is no longer required, then you can clear the region. This will also delete any saved name and
return the specific region number to default settings.
