Oncam Evolution EVO-05NCD, Руководство пользователя

Страница: 29 / 62

29
Installation & Operation Guide: Oncam Grandeye 360
o
Evolution Camera Range
Version 2.4 | January 2014 | Oncam Grandeye, 115 Hammersmith Road, London. W14 0QH. UK
T: +44 (0)20 7371 6640 | E: info@oncamgrandeye.com | W: www.oncamgrandeye.com
10 First Time Operation
Once the camera has been successfully installed, it needs to be configured for first use. The steps for doing this are
as follows:
•
Configure the network setting
• Use a browser to connect to the camera Web interface for the first time AND set the root password
• Check the cameras view and ensure the camera is correctly focused
• Image setup
•
Set up motion detection, if required
• Set up privacy zones, if required
• Define rules and actions for the event alarm
In order to use the camera, you will need to know its IP address. There are two typical installation types. The first
type uses a DHCP server or router to automatically assign unique, valid IP addresses to each camera. The
alternative is a manually configured network using static IP addresses.
10.1 DHCP
‐
Based Installation
The camera is configured for DHCP by default so that multiple cameras can be added to the network, each with a
unique IP address. If you are using DHCP for the permanent camera address, be sure to reserve that address with
the DHCP server to ensure that the assigned IP address does not change. If a DHCP server is not found or DHCP is
disabled, the camera will revert to its current static IP address.
10.2 Static IP Installation
If there is no DHCP server or DHCP is disabled, then the factory default IP address is 192.168.0.200. For a
multi
‐ camera install, always introduce the cameras one at a time and then re ‐ address them to a non ‐ conflicting
static IP address. This is done using the Network Settings page of the camera Web interface or the IP Configuration
Tool.
Install the Oncam Grandeye IP Configuration Tool. The latest version of this is available on the Oncam
Grandeye website www.oncamgrandeye.com and the IP addresses of the Oncam Grandeye 360°
IP camera can be configured.