Omron V720S Series, Руководство по эксплуатации

Страница: 86 / 142

System Command Section 5-4
5-29
5-4-10 Lock Setting Read (LR): ISO Mode Only
This command reads lock setting information of a Tag incorporating I.CODE2 chip.
<Command Format>
STX Node No.. Command code
“LR”
Tag
type
First lock page No. of lock
pages
ETX BCC
1 2 2 1 2 2 1 1
Tag type Specifies Tag type.
A: I.CODE2 chip
First lock page Specifies the first page, which reads lock information, in hexadecimal.
Specification range: 00 to FFh
（
I.CODE2 chip: 00 to 1Bh
）
* For details, refer to 2-4 Memory Map of Tag.
No. of lock pages Specifies the number of pages, from which reads lock information, in hexa-
decimal.
Specification range: 01h to FFh （ I.CODE2 chip: 01 to 1Ch ）
<Response Format>
STX Node No.. Retry
flag
Command code
“LR”
Lock Informa-
tion
Response
code
“00”
ETX BCC
1 2 1 2
No. of lock
pages
2 1 1
Response code 00:normal completion
For other response codes, refer to 5-2-4 Response code List.
Lock information Indicates lock information having read from Tag.
Locked:”01”
Not locked :”00”
The number of characters of the data: “read pages x 2.
Note This command is for ISO Mode Only. The command is not available in
I.CODE1mode.