Other Commands
Section 5-8
5-58
5-8-2-3 Repeat Mode
The Reader/Writer waits for a Tag to enter the R/W Antenna’s communications area. Every time an
Tag enters the communications area, the Reader/Writer communicates with the Tag and returns a
response. It is not until communications are stopped by the Stop or Reset command that the
Reader/Writer accepts the next command.
Note
To send another command from Repeat Mode, be sure to use either the stop
command or reset command, and make sure that the Reader/Writer has fin-
ished processing commands and is in command waiting status before send-
ing the new command.
Repeat Command
(Host)
(Reader/Writer)
(Tag)
Waits for a Tag to enter
Yet to enter
Waits for a Tag to enter
Receives a response
Busy
Busy
Receives a response
Communications process
Tag(1)
Passes
Busy
Busy
Sends a response
Waits for a Tag to enter
Tag(2)
Sends a response
Waits for a Tag to enter
Busy
Communications process
(1) Waits for a Tag to enter the R/W
Antenna’s communications area.
(2) When a Tag enters the R/W
Antenna’s communications area, the
Reader/Writer communicates with the
Tag.
(3) On completion of communications, it
returns a response.
It waits for another Tag to enter the
R/W Antenna’s communications area.
(4) When another Tag enters the R/W
Antenna’s communications area, it
communicates with the Tag.
Yet to enter
Yet to enter
Yet to enter
Passes
Содержание V720S Series
