84
Ch
apt
e
r
3
Set
ting Adjust
ed
to Appl
ication
F3SJ-A
User’s Manual
What can be done by the setting tool
2.
The muting sensor is blocked and the safety function of the F3SJ is disabled
When muting sensors A1 and B1 are turned ON in this order, and the muting function is enabled. In
this state, the safety function of F3SJ is disabled.
3.
Muting sensor A1 is turned OFF
A workpiece finished passing the muting sensor A1 and the sensor starts turning OFF. For standard
muting system, muting is released here. For exit only muting, F3SJ's safety function is disabled for a
exit only muting delay time: T5.
4.
Muting sensor B1 is turned OFF
A workpiece finished passing the muting sensor B1 and the sensor is turned OFF. F3SJ disables its
safety function if it is within a exit only muting delay time.
Workpiece
F3SJ
A1 B1
Hazardous zone
A1 : Muting sensor to be connected
to muting input 1
B1 : Muting sensor to be connected
to muting input 2
V
d2
d1
V
Workpiece
F3SJ
A1 B1
Hazardous zone
A1 : Muting sensor to be connected
to muting input 1
B1 : Muting sensor to be connected
to muting input 2
d2
d1
Workpiece
F3SJ
A1 B1
Hazardous zone
A1 : Muting sensor to be connected
to muting input 1
B1 : Muting sensor to be connected
to muting input 2
V
d2
d1
Courtesy
of
CMA/Flodyne/Hydradyne
▪
Motion
Control
▪
Hydraulic
▪
Pneumatic
▪
Electrical
▪
Mechanical
▪
(800)
426-5480
▪
www.cmafh.com
