![background image](http://html1.mh-extra.com/html/omron/nt620c/nt620c_operation-manual_744559163.webp)
4-7
Section
Touch Switches
151
4-6-2 Image Library LAMP Setting
The Image Library LAMP overwrites a different graphic and displays it at a sepa-
rate position according to an instruction (ON/OFF) from the PC.
PC
OFF state
ON state
Position and
graphic to be
displayed can be
varied.
ON
For the Image Library LAMP, presence of external frame, Lit/Flashing, color dis-
play, guide display, and so forth cannot be specified, unlike normal LAMP.
However, since the attributes of every display factors when registering the Li-
brary Data are displayed as they are, a range of application will be widened fur-
ther.
Image Library LAMP Attributes
The following attributes can be set to the Image Library LAMP.
•
LAMP code
Graphics to be displayed during ON and OFF are specified by the Library Data
or Image Data code, respectively.
•
Display position
Positions to be displayed during ON and OFF are specified.
4-7
Touch Switches
The NT620S/620C has a function whereby input operations can be performed by
using touch panels displayed on the screen. NT620S/620C screens can be
switched, or bit information sent to the PC, by pressing (lightly touching) the
“touch switches” in a panel.
The touch switches can also be made to light up (or flash) and go off like lamps.
Touch switches are set when creating the screen data with the support tool.
The following explanation covers the types of touch switch that can be displayed,
and functions other than that for notification to the PC.
For the actual method used to notify touch switch statuses to a PC, see “Lit
(Flashing) and Unlit Touch Switch Statuses (Changing the Contents of Allocated
Bits)” (page 216).
For the actual method used to ascertain touch switch statuses at the PC, see
“Notifying the PC that a Switch has been Pressed (Determining Touch Switch
Status)” (page 217).
Caution
- Do not use the PT touch switch input functions for applications where danger
to human life or serious property damage is possible, or for emergency switch
applications.
- Press touch switches with a force of no greater than 20 N. Applying higher
force may cause glass to break, cause injuries, and prevent operation.
- Do not press touch switches carelessly while the backlight is off or while noth-
ing is displayed on the screen.
Only press touch switches after confirming system safety.
Содержание NT620C
